So your touch sensor is not working?

sensorWe have all experienced it, you buy something at Aliexpress. It arrives and you confirm receipt before you have time to test everything and then when you finally get around to that… there is a problem.
That happened to me with a TTP223B capacitive touch sensor. Whatever I tried, the output remained low. Slightly frustrated I was looking at the rather simple board and thought that there really couldn’t be much wrong with it.
ttp223-icFound a datasheet of the TTP223B ic that is on this module and started measuring. Well to make a long story short, the input pin (pin 3) seemed to have no connection with the sensorplate. When I would just touch the input pin, it switched very well. According to an application note in the datasheet capacitor C1 should be between  the input and  the ground and as it should be connected it also should be connected to the  sensorplate, which in fact it was. Turns out pin 3 was not connected to anything. A small wire that I soldered between the top of C1 and  pin 3 remedied everything and after that the sensor worked wonder well.
On checking the feedback of people who ordered this sensor, I noticed many experienced the same problem. No doubt the manufacturer (not perse the seller) must have known about this.



6 thoughts on “So your touch sensor is not working?”

  1. Do not matter if manufacturer know about this bug or not. I am sure, that seller got many of these boards and he will sell them, do not matter if it has bug or not.

    BTW you can add additional feedback on aliexpress for circa 6 months and open case 15 days after confirmation…


  2. Dear Mr Arduino. I’d like to ask you some question about my project thats using peltier, i just have a thought that you might be able to help me. Could i get your email maybe? or any other way i can contact you, since i can’t attach any picture here to help you understand my problem. Iam a student in a polytechnic and last year, you already help me a lot with my final project by replying my comment on this website on your “Arduino Dimmer” tutorial. Thank you so much for that and please reply me :))

Leave a Reply to peerodeee Cancel reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.